New Drawing: iPhone 7 Will Be Thicker Than the iPhone 6s

Two new drawings show iPhone 7 and iPhone 7 Plus forward with almost identical dimensions as on iPhone 6s and 6s Plus, but in the thickness happens changes.

The rumors about the upcoming iPhone 7 will take no end, and it is often hard to be clever on the many different and often dubious images and information that allegedly shows Apple’s secrets.

Now two new schematic drawings over the iPhone and iPhone 7 Plus 7 been revealed by the website Letem světem Applem. The drawings should, according to the page come from an Apple supplier that has sent the drawings to a company that produces screen protectors.

Just as the first drawings, there showed up a month ago, it is possible to see the dimensions of the two iPhones.


As can be seen above the upper voices, the dimensions match the previously published targets in both height and width with the objectives 158.2 x 7.9 mm for iPhone 7 and 158.2 x 77.9 mm for iPhone 7 Plus.

On the other hand, gets the General iPhone 7 not the same thickness as the iPhone 6 and 6s, according to one of the drawings. Here is the thickness for increased minimally from 7.1 to 7.2 mm. So there are not exactly speak of a conspicuous increase, but the extra millimeter can potentially allow an increase in battery capacity from the small 1,715 mAh.

However, it is still too early to conclude that the increase in thickness results from a battery extension for iPhone according to the drawings will retain 7 Plus the usual thickness of 7.3 mm. It can also be because there is no reverse just as intruded in the larger Plus-model, as it already has been 0.2 mm thicker than the normal iPhone.

Other details are confirmed

In addition to the dimensions we see also that only the great iPhone 7 Plus, equipped with dual-camera – so two camera sensors on the back. On both iPhones sticking the cameras still out, although there is a millimeter in thickness on the normal iPhone.

In addition, it can be seen that antenna lines are moved from the back and to the top of the bottom to get a more stylish expression. It has both been previously rumoured, but also pictures of.

Last but not least, is the so-called Smart Connector again to find on the back – here only on iPhone 7 Plus. First, it was reported that Smart Connectoren would come. Then there came rumors that the plans were dropped, and now seen the so again. To make the confusion total there are both seen pictures with and without the magnetic socket, which forces these drawings that only one of the models get Jack.

With Smart Connector, it will be possible to connect art and, for example, a keyboard while connected is powered. The plug can be seen already on Apple’s iPad Pro – two tablets.

As always, it is worth taking such schematic drawings with a grain of salt. There is nothing which at present can confirm that the information is consistent with the final iPhones, because there are so many otherwise sounding information.

The website informs us, however, that these drawings have also been sent out the previous two years and has been shown to vote entirely in line with the real products.

The two iPhones is expected to be launched – as always – in the month of September, where the more precise date like to lie in the beginning of the month. On the launch still hides a iPhone Pro, which previously has been known yet.